PIPELINE STRAINER

Simplex Bucket Strainer

ASME Sec. VIII code design, Casted and fabricated
Size: 2” ~ 42”
Material: Carbon steel, stainless steel, alloy steel,
Teflon lining, FRP, etc.
Pressure / Temperature Rating: ANSI 150 ~ 2500 LB
Special material & sizes upon request

Conical ( Temporary ) Strainer

Size: 1-1/2” ~ 24”
Type: FT1, FT2 & FT3
Material: Carbon Steel, Stainless Steel 304, 316
Pressure / Temperature Rating: ANSI Class 150 ~2500 LB

Duplex Bucket Strainer

ASME Sec. VIII code design, Casted and fabricated
Size: 2” ~ 24”
Material: Carbon steel, stainless steel, alloy steel,
Teflon lining, FRP, etc.
Pressure / Temperature Rating: ANSI 150 ~ 600 LB
Special material & sizes upon request.

Y-Strainers

Size: 1/2” ~ 24” Casted , forged & fabricated
Material: Carbon steel, stainless steel, alloy steel,

Teflon lining, FRP, etc.
Pressure / Temperature Rating: ANSI 150 ~ 2500 LB
Special material & sizes upon request .

T-Strainers

Size: 2” ~ 24” Type: TB , TS , TY & TAM
Material: Carbon steel, stainless steel 304 , 316
Pressure-Temperature Rating- ANSI 150 ~2500 LB
Special material & sizes upon request

Resin Trap

Suitable for line sizes up to 14”
Suitable for flow up to 360 m3/h
Material: Stainless steel 304/316/Hastelloy C-276, Monel, PVDF, Teflon lining, etc.

In-Line Strainer

Size: 2” ~ 8”
Type: ILS
Material –Carbon steel , stainless steel 304 , 316L
Pressure-Temperature Rating- ANSI 150 ~300 LB
Special material & sizes upon request
For high flow rate & low pressure loss
Eye-Nut bolted cover for easy maintenance & available for semi-automatic operation

AUTOMATIC SELF-CLEANING FILTERS

ABF Brush Type

ABF Self-cleaning filter is designed with wedge (V) wire screen and self-cleaning by the rotating brush to remove debris on the surface of the screen. It works continuous without interruption and no maintenance and running parts required.
Size: 8” ~ 24”
Material: Stainless steel 304, 316L
Filtration rating: 200/300/500/800/1000/2000 Micron
Special material, sizes, rating & explosion proof grade upon request.

ABW Back-Flush Type

ABW Self-cleaning filter is designed with multi-cartridge wedge (V) wire screens and self-cleaning by the back-flushing to remove debris on the surface of the screen.
It works continuous without interruption and no maintenance and running parts required.
Size: 4” ~ 36”
Material: Stainless steel 304, 316L
Filtration rating: 50/75/100/200/250/300/500 Micron
Special material, sizes, rating & explosion proof grade upon request.

SCF Scraper Type

SCF Self-cleaning filter is designed with wedge (V) wire screen and self-cleaning by the rotating scraper or brush to remove debris on the surface of the screen. It works continuous without interruption and no maintenance and running parts required.
Size: 2” ~ 16”
Material: Stainless steel 304, 316L
Filtration rating: 50/100/150/200/300/500/800/1000/2000 Micron
Special material, sizes, rating & explosion proof grade upon request.

PROCESS LIQUID FILTERS

Cartridge Filters

ASME code design with or without stamp
Housing-Carbon steel, stainless steel 304/316/316L/Teflon lining/FRP
Cartridges – Melt blown, string wound, pleated membrane, resin bonded, stainless steel 316
Size: 3/4” ~ 12”
Pressure/Temperature rating – ANSI 150 – 300 LB
Special material, pressure/temperature rating, accessories, upon request.

Bag Filters

ASME code design with or without stamp. Single or multi-bags type.
Housing: Carbon steel, stainless steel 304/316/316L
Bags: polyester, propylene, Nomex, nylon, cleanable stainless steel, pleated etc.
Size : 3/4” ~ 12”
Pressure/Temperature rating – ANSI 150 – 300 LB
Special material, pressure/temperature rating, accessories, upon request.

High Flow Filter

A combination the features of cartridge filter and bag filter, higher efficiency, lower disposal costs, lower maintenance costs, smaller filter housing, longer filter life, seal better & high dirt holding capacity.
ASME code design with or without stamp.
Housing: Carbon steel, stainless steel 304/316/316L
Cartridges: polypropylene, glass fiber, polyester.
Size: 2” ~ 24”
Pressure/Temperature rating – ANSI 150-600 LB
Special material, pressure/temperature rating, accessories, upon request.

PROCESS GAS FILTER

Filter Separator

For high-efficiency separation of both solid and liquid contaminants
Build to ASME code with stamp
Remove solids larger than 0.5~3 microns
99% and liquid particles 100% of 8 microns and 99% of 0.5~3 microns
Metering & regulation stations, compressor stations, natural gas plants, gas distribution systems, etc.

Dry Gas Filter

GP series –ASME Sec.VIII , Div. 1 code design , with or without stamp
Size : 1” ~ 12”
Pressure / temperature Rating –ANSI 150- 600 LB
Material : Carbon steel or stainless steel , NACE application can also be accommodated

AVIATION FUEL & OIL- FILTRATION & SEPARATION

Filter Water Separator

K-Flow filter water separators is a vessel containing filter/coalesce and separator elements that continuously removes dirt and water from aviation jet fuel / diesel / light oil to levels acceptable for servicing modern aircraft and vehicles. A filter water separator can have either a vertical or a horizontal configuration and multiple stages. Vessel are designed and built in accordance with the strict engineering guidelines and pressure vessel regulations.
Design code: ASME Sec. VIII, Div.1 & API/IP 1581 lately edition.
Nominal micron rating: 0.5 ~ 25 micron, etc.
Maximum differential pressure: 1.0 bar (15 psi)
Admissible operating temperature: -30 ~ +80 ℃
Applications: Jet fuels / Diesel fuels / Light oils
Construction: Carbon steel or stainless steel
Options: ASME U stamped, Differential pressure indicator & Switch & Transmitter, Sampling probe, Automatic air vent with check valve, Pressure relief valve, Sight glasses (level gauges), Water slug control valve, Rate flow control valve, Flange float pilot & automatic eater drain valve, Drain valve.

Micro-filter

K-Flow aviation micro-filter are designed to continuously remove fine particles such as rush, dirt, sand and pipe scale from aviation fuel systems. These highly efficient micro-filter are used at refineries, bulk fuel depots, transfer stations and airports, predominantly prior to filter/water separators to protect and prolong coalesce element life.
Design code: ASME Sec. VIII, Div.1 & API/IP 1590 lately edition.
Nominal micron rating: 0.5 ~ 30 micron, etc.
Maximum differential pressure: 1.5 bar
Admissible operating temperature: -30 ~ +80 ℃
Applications: Jet fuels/Diesel fuels/Light oils
Construction: Carbon steel or stainless steel
Options: ASME U stamped, Differential pressure indicator & Switch & Transmitter, Sampling probe, Automatic air vent with check valve, Pressure relief valve, Drain valve.

Clay Filter – CLF

CLF Clay filter is to remove unwanted surface active surfactants, coloring and other additives which maybe present from refining process or during transportation of Jet fuel. CLF are normally installed in front of a FWS.
Internal coating acc. To MIL-C-4566 lately edition standard
Material: carbon steel
Design pressure / temperature – upon request